F030-P Batch Controller, pulse input, 1-stage relay output

SKU: F030-P-AX-CX-HD-OR-PM-XX-ZX
F030-P Batch controller
Single stage batching
115-230vAC powered
Auto-overrun correction
GRP Field mount IP67 enclosure

 

  • £589.03
  • £706.84 inc VAT
Qty:  

Description

  • SKU
    F030-P-AX-CX-HD-OR-PM-XX-ZX
 
F030-P Batch controller
Single stage batching
115-230vAC powered
Auto-overrun correction
GRP Field mount IP67 enclosure
 
The Fluidwell F030-P batch controller is a field mountable display, showing the preset value and the running batch value simultaneously.
Pulse input model which accepts; Reed switch, NAMUR, NPN, PNP, Sine wave (coil), active pulse signal.
Selectable on-screen engineering units; volumetric or mass; ml, L, m³, GAL, USGAL, Kg, lb, bbl or no units.
A batch quantity can easily be entered,and repeating batches can be executed. 
The preset value is displayed during the batch as well as the remaining quantity and units of measurement.
The included electo-mechanical relay can be used to control additional items such as solenoid valves, or with the addition of a relay can be used to switch a pump on and off with the batch.
 

Specification

     
    Large display shows preset value and running batch value simultaneously.
    Self-learning overrun correction.
    One control output to drive a valve or pump.
    Easy operation to enter a batch value and to control the process.
    Count-up and count-down function available.
    Actual batched quantity: seven 17mm (0.67") digits.
    Preset value: seven 17mm (0.67") digits during programming and 8mm (0.31") digits during process .
    Total - resettable: seven 17mm (0.67") digits.
    Accumulated total - not resettable: eleven 8mm (0.31") digits.
    Selectable on-screen engineering units for totalizer: ml, L, m³, GAL, USGAL, kg, lb, bbl or no unit.
    Auto backup of settings and running totals in EEPROM memory.
    Easy configuration with clear alphanumerical display.
    Ambient temperature: -40°C to +80°C (-40°F to 176°F).
     

Downloads