Six key things to consider when selecting a water level logger

When selecting a water level logger for your application it is best to consider a number of factors. Our guide should help you to choose the most appropriate water level logger. We need to ensure that it works efficiently, requires little maintenance and provides the best accuracy for your application.

What will my water depth be?

When you select a water level logger one of the first things you will need to know is the water level at your monitoring location(s). To determine this a knowledge of the potential change in level at each location will need to be known. For example if you have 100m of water in a borehole, but the change will only be 5m, you do not need a 100m range water level logger. A 10m range model would be sufficient in this example. If the variation in level would be greater, for example 80m, then a large range water level logger would be required.

What accuracy do I need?

After determining the range of the water level logger the next thing for you to consider is the accuracy. The lower the range of the water level logger the greater the accuracy. For example if you were to look at the 9m Rugged Troll 100, this would have an accuracy of +/-9mm. However in comparison the 76m version would have an accuracy of +/-76mm. If you were monitoring a surface water application we would highly recommend using a model with a lower level range. This is because these applications typically have lower levels so would provide the best possible accuracy.

Will the water be potential saline / acidic?

The potential salinity and acidity of the water are very important to consider. If your application is likely to be acidic or saline you would need to consider certain materials for your water level logger. For highly saline or acidic applications a titanium bodied product would be recommended. This has a ceramic pressure sensor to ensure the unit is not corroded or damaged. All these materials offer high levels of resistance ideal for these applications. In the case of a clean water application stainless steel or titanium products can be used.

Is the area been monitored likely to flood?

Determining if the location is likely to flood is crucial. This can be the difference between having a system which works accurately and a system becoming damaged. In applications which could be prone to flooding we recommend that you use an absolute (non-vented) water level logger.  With a vented system you will have a breather tube, with a desiccant connected to the top of the sensor cable. If this desiccant and breather were to become submerged there is potential for water ingress into the water level logger. This has great potential to damage the sensor. As absolute water level loggers are completely sealed there is no risk of water ingress via a vent tube. This makes it ideal for potential flood application.

Do I need a Vented or Absolute logger?

It may be the case that the points above have highlighted key aspects of your applications and  confirmed the model you need. If not, then an overview of the key advantages and disadvantages of a vented and absolute water logger should help.

If you are looking for the highest level of accuracy then the vented option would be recommended. In most cases this will also be more accurate than an absolute system. An example of this is shallow applications, as the vented tube directly transmits barometric data to the water level logger pressure transducer. With an absolute sensor you would need to consider both the inaccuracies of the water level logger and the barometric logger. However, in deep monitoring applications or those with a greater level variation it may be advantageous to use an absolute sensor. This is because as the measurement of individual barometric data alongside level data allows you to determine the barometric efficiency.

What budget do I have?

Cost is another factor, typically absolute water level loggers are lower in cost, especially when monitoring with multiple sensors in one location, as a single barometric logger can be used to compensate multiple water level loggers. You may find the costs could be comparable to monitoring a single point, however this would be determined by your cable lengths. As well as purchase cost, the maintenance of absolute water level loggers is a lot less as there is not desiccant or breather tube to protect from water ingress.

If you require any further information or have any questions or queries please feel free or contact a member of our sales team – 01280817304 / mail@bellenviro.co.uk

Please visit our website for more information on water level loggers