- Flow Meters
- Water Quality Monitoring
- Water Level Measurement
- Ground Water Monitoring
- Weather Monitoring
- Process Instruments
- Data Logging and Telemetry
- Flow Meter Hire
Oil Water Interface Meters
Oil Water Interface meters are suitable for the measurement of floating product – LNAPL (Light non-aqueous phase liquids) and sinking product – DNAPL (Dense non-aqueous phase liquids) in both surface water and groundwater applications. The meter itself works by utilising light rays and electrical conductivity.
When the probe on the meter reaches the liquid surface of the well or borehole the infrared ray on the meter deflects and meter gives a sound and a light signal. If the medium that the meter comes into contact with is non-conductive such as an oil, the contact sensors on the meter are not triggered and the signal of the interface meter remains continuous. However, if the probe contacts with water, the contacts on the meter will experience a short. This, in turn, shuts off the infrared sensor and the output signal on the interface meter will then turn to a pulsed signal. The user can then measure, using the tape, the corresponding water and interface levels of the well.
Why use Heron Instruments Oil Water Interface Meters?
♦ Ability to measure products layer as thin as 1mm
♦ Tape lengths available from 15 to 150m
♦ IP65 electronic module
♦ IP68 Probe – field replaceable
♦ High-quality Kynar jacketed steel tape
♦ 5-year warranty, with a 1-year warranty on the probe
Sm.Oil Interface Meter
Small Reel Interface Meter20m tape lengthCompact / portable designMeasures LNAPL and DNAPL levelsCan measure product as thin as 1mm£839.00
£1006.80 inc VAT
Hm.OIl Interface Meter
Oil / Water Interface Meter15m to 150m tape lengths availablePortable designMeasures LNAPL and DNAPL levelsCan measure product as thin as 1mm£889.00
£1066.80 inc VAT